AIDA Imaging UHD-NDI3-300 4K POV Camera

The UHD-NDI3-300 4K POV Camera from AIDA Imaging features the ability to produce stunning NDI HX3 at 1080p60 via its 4K Sony CMOS sensor, exhibiting the clearest Full-HD video over any HX3 network. If you need something a bit more grandeur, you can opt into the cameras 4K 60fps NDI HX, accounting for every detail possible in any frame. You also get the luxury of having a HDMI 2.0 port for output or field tests, set at any resolution you need it at. After meticulous refinement, the AIDA UHD-NDI3-300 emerges as the pinnacle of AIDA meeting NDI HX3, making any waiting justified for this camera.

HX3 - The Golden Ratio is HX

The UHD-NDI3-300 visualizes crispy Full-HD video by allowing the NDI® stream to run at up to 60mb/s (4x the bitrate of NDI®|HX.) This of course leads to better visual quality, and lowered latency all around, better than HX or a HD sensor can handle! The UHD-NDI3-300 comes with a preloaded NDI license. No effort on your end required!

AIDA's Next Generation 4K Cameras!

The UHD-NDI3-300 brings the next gen POV 2160p resolutions to NDI HX, as well as the newer 1080p HX3.

UHD-NDI3-300 Quick Specs:

• NDI|HX3, HDMI
• NDI®|HX3 Camera
• UHD Streaming
• 2160p, 1080p, 1080i & 720p
• 5mm 4K CS Mount Lens
• HFOV: 72°
• Line in Audio
• Synced NDI|HX Streaming

Light it up!

Located on the front of the UHD-NDI3-300 is a small tally light to let your talent know when the camera is live!

AIDA Cabling 2.0

With a small revision, the new UHD-NDI3-300 series will come with the connector pigtail firmly attached! No more bent pins!

It pays to speak VISCA

The UHD-NDI3-300 uses VISCA over IP to communicate its commands, making it easily accessible whenever, wherever!

Out we go!

The UHD-NDI3-300 is capable of running HX3(or HX), RTSP, RTMP, SRT, and HDMI all simultaneously, per usual!

PoE+ for the satisfying cable run

With the ability to run power, control and video over one ethernet cable, you will never have bunches of cables hanging around!

Predictable Mounting

With a 1/4″ 20 mounting hole on the top and bottom, the possibilities are endless on mounting the camera!