Datavideo ITC-100 8-Way Intercom System with 4 Headsets and 4 Beltpacks

The Datavideo ITC-100 Intercom System provides 8-Way talkback and tally indicators from Datavideo. The ITC-100 is an 8-users Wired Intercom System with 4 Belt backs and 4 headsets. The director can select to talk to an individual channel or to all channels simultaneously. The ITC-100 is a standard 19" 1U rack design, so it is simple to integrate into any rack system for use in the field or studio.

ITC-100 Features:

Front Panel:

• Combined XLR and 1/4' (6.3 mm) microphone input
• Dynamic / Condenser microphone selection switch
• 1/4' (6.3mm) Jack for Headphones without a microphone
• 3.5mm Jack for Headset with microphone
• Speaker with the volume control knob
• Channel buttons 1 – 8 for communicating with individual channels.
• ALL button to activate communication with all channels.
• Base Unit MUTE button

Rear Panel:

• 8 x 5pin XLR connectors for cable connection to ITC-100SL Belt Packs
• Additional cable purchase: CB-3 is a 20m 5pin XLR Male to XLR Female cable which allows cable connection to the ITC-100SL of up to 200m
• 2 x 15pin D Sub Tally Input sockets for tally communication from the switcher to tally lightbox

ITC-100SL Belt Pack for Crew members:

• Call Button for sending paging signal to Base Unit
• Press and hold the Talk button to communicate with the director on the Base Unit end
• Headset volume control knob
• Bi-Color Tally LED on Belt Pack Unit
• TD-2/3 Camera Tally Indicator connected to the Belt Pack

**When ITC-100 used with SE-800, RMC-140 or RMC-90 required to enable Tally Light feature