Datavideo ITC-100 Intercom Base Station with Four HP-2A Headsets and Four Belt Packs

The Datavideo ITC-100 Intercom System provides 8-Way Talkback and tally indicators from Datavideo. The ITC-100 is an 8-users Wired Intercom System with 4x Belt backs, 4x HP-2A headsets, and 4x Tally lights. The director can select to talk to an individual channel or to all channels simultaneously. The ITC-100 is a standard 19" 1U rack design, so it is simple to integrate into any rack system for use in the field or studio.

HP-2A Dual Side Headset
The HP-2A is a dual side headset with 3.5mm jack for Datavideo Intercom System. It features two ear headset, closed cans to avoid sound leakage in/out, soft ear pads and noise-canceling microphone.

TC-100SL Belt Packs
The Datavideo ITC-100SL is an additional Belt pack from Datavideo. This belt pack can is compatible with the IITC-100 and ITC-200B. The Intercom Belt pack features a 5-pin XLR input for talkback, Bi-Color Tally LED and power source. The Belt pack has a 3.5mm and 2.5mm headphone jacks for standard headphones. The user can communicate up to 656ft of distance.

ITC-100 Features:

Front Panel
- Combined XLR and 1/4' (6.3 mm) microphone input
- Dynamic / Condenser microphone selection switch
- 1/4' (6.3mm) Jack for Headphones without a microphone
- 3.5mm Jack for Headset with microphone
- Speaker with the volume control knob
- Channel buttons 1 – 8 for communicating with individual channels.
- ALL button to activate communication with all channels.
- Base Unit MUTE button

Rear Panel
- 8 x 5pin XLR connectors for cable connection to ITC-100SL Belt Packs.
• Additional cable purchase: CB-3 is a 20m 5pin XLR Male to XLR Female cable which allows cable connection to the ITC-100SL of up to 200m.
- 2 x 15pin D Sub Tally Input sockets for tally communication from the switcher to tally lightbox.

ITC-100SL Belt Pack for Crew members
- Call Button for sending paging signal to Base Unit
- Press and hold the Talk button to communicate with the director on the Base Unit end.
- Headset volume control knob
- Bi-Color Tally LED on Belt Pack Unit
- TD-2/3 Camera Tally Indicator connected to the Belt Pack

**When ITC-100 used with SE-800, RMC-140 or RMC-90 required to enable Tally Light feature